产品介绍
Description: Millipak-200 Filter Unit 0.22 µm Gamma Compatible 1/4 in. NPTM
Trade Name: Millipak
Qty/Pk: 3
Key Applications: Laboratory Filtration
Outlet Connection Diameter (in): 1/4
Inlet Connection Diameter (in): 1/4
Outlet Connection: NPT
Maximum Inlet Pressure, bar (psi): 5.2 (75) @ 25 °C
Maximum Differential Pressure, bar (psid): Forward: 4.1 (60) @ 25 °C; 1.7 (25) @ 80 °C; 0.35 (5) @ 123 °C. Reverse: 0.7 (10) @ 25 °C
Diameter, cm (in): 7.6 (3.0)
Inlet Connection: NPT
Oxidizable Substances: Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥200 mL
Bubble Point at 23 °C: ≥3450 mbar (50 psig) air with water
Process Volume, L: 100
Pore Size (µm): 0.22
Wettability: Hydrophilic
Sterilization: 3 autoclave cycles of 90 min @ 123 °C; capable of 45 kilogray (4.5 Megarad) gamma exposure; not in-line steam sterilizable
Good Manufacturing Practices: This product was manufactured in a facility which adheres to Good Manufacturing Practices.
Vent Cap Material: PVDF
Bacterial Retention: Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
Gravimetric Extractables: The extractables level was equal to or less than 5 mg per device after 24 hours in water at controlled room temperature.
Product Name: Millipak-200 Filter Unit
Non-Fiber Releasing: This product was manufactured with a Durapore membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
Filtration Area, cm²: 1000
Sterility: Non-Sterile
Bacterial Endotoxins: Aqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Device Material: Polycarbonate
Connections, Inlet/Outlet: 6 mm (1/4 in.) NPTM
Length, cm (in): 13.0 (5.1)
Capsule Type: Liquid
Configuration: Stack Disk
Chemistry: Hydrophilic PVDF
Media: Durapore®
Flow Rate, L/min: 18 @ 3.0 bar ΔP
Support Material: Polycarbonate
Packaging: Double Easy-Open bag
技术指标
|
结构材质
|
|
外壳
|
聚碳酸酯
|
|
|
Hydrophilic PVDF
|
|
接口
|
|
进出口
|
6 mm (1/4 in.) 带钟罩的倒刺软管接口
|
|
最大进口压力，bar (psi)
|
25 °C 时的压力为 5.2 (75)
|
